/, Thermaltake, Liquid Cooling/Pacific M4 Motherboard Water Block (ASUS TUF X299 MARK I)
  • Pacific M4 Motherboard Water Block (ASUS TUF X299 MARK I)
  • Pacific M4 Motherboard Water Block (ASUS TUF X299 MARK I)
  • Pacific M4 Motherboard Water Block (ASUS TUF X299 MARK I)
  • Pacific M4 Motherboard Water Block (ASUS TUF X299 MARK I)
  • Pacific M4 Motherboard Water Block (ASUS TUF X299 MARK I)
  • Pacific M4 Motherboard Water Block (ASUS TUF X299 MARK I)

Pacific M4 Motherboard Water Block (ASUS TUF X299 MARK I)

$154.99

Support ASUS Aura Sync, the Pacific M4 is an all-in-one (CPU and motherboard) water block with a 256 colors LED module for ASUS TUF X299 MARK I motherboard. The water block utilizes a bigger cold plate along with 0.15mm micro-channel fin construction, allowing coolant to flow directly over all critical areas as well as providing the ultimate in cooling performance for Intel socket LGA-2066 type CPU.

4 in stock

Product Description

*The image is for reference only.

*The image is for reference only.

Aura RGB Header (ASUS TUF X299 MARK I)


Specification:

P/N CL-W207-CU00TR-A
Compatibility Intel LGA 2066
ASUS TUF X299 MARK I
Dimension 154 (L) x 114 (W) x 29.4 (H) mm
Material Copper + PMMA
Threads G¼”
Rated Voltage 12 V
Power Input 2.4 W
Interface ASUS AURA SYNC (12V 4Pin)
Weight 770g

* Specifications are subject to change without notice.
* The product picture(s) is only for your reference, it may differ from the actual product.

Caution

Thermaltake recommends the following steps to be taken before using the Pacific series radiators and water blocks

  1. To ensure a clean loop, flush and rinse your radiators and water blocks with distilled water prior to use.
  2. Do not use tap water or distilled water as your coolant, it may harm your loop and reduce performance.
  3. It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while protecting the entire liquid loop from corrosion.
  4. Before storing your water cooling components, please clean, rinse and dry. This will ensure a longer lifespan for your components.

Thermaltake recommends the following steps to be taken after completing your water loop setup

  1. It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while preventing the entire cooling system – copper, brass, nickel, aluminum, and steel – from corrosion.
  2. Fill the reservoir with coolant and cycle the power on and off several times while the pump pushing the coolant into the loop.
  3. DO NOT let the pump run dry, when there is no liquid entering the pump turn off your power immediately
  4. Fill the reservoir to the top as it will prevent air from going into the pump
  5. If necessary tilt the system slightly from side to side to bleed the air out of the loop.
  6. Place some paper towels under fittings and joining points to test for leaks.
  7. Run the loop with the fill port open for about 24 hours to completely bleed the air out of the loop
  8. Before starting, flush out your system correctly to prevent any coolant or unwanted particles sticking to your tubes, radiators and other cooling components.
  9. Coolant might fade over time.

Additional Information

Weight 2 lbs
Dimensions 12 x 10 x 5 in

Reviews

There are no reviews yet.

Be the first to review “Pacific M4 Motherboard Water Block (ASUS TUF X299 MARK I)”