• Dr.Power II
  • Dr.Power II

Dr.Power II

$39.99

– Designed from the ground-up, it supports every ATX power supply available today up to ATX12V v2.3.
– Oversized LCD panel that accurately shows the value of each specific power rails (within one-tenth of a volt).
– Accurate voltage indicating for +12V/+5V/+3.3V/5VSB/-12V.
– Built-in output connectors diagnostic system, low-voltage, high-voltage, no voltage, PG alarm systems.
– Easily troubleshoots system failure due to unstable power supply.
– Built-in alarm system to identify user when the power supply demonstrates abnormal characteristic.

8 in stock

SKU: AC0015 Categories: , Tag:

Product Description

 

 

– Designed from the ground-up, it supports every ATX power supply available today up to ATX12V v2.3.
– Oversized LCD panel that accurately shows the value of each specific power rails (within one-tenth of a volt).
– Accurate voltage indicating for +12V/+5V/+3.3V/5VSB/-12V.
– Built-in output connectors diagnostic system, low-voltage, high-voltage, no voltage, PG alarm systems.
– Easily troubleshoots system failure due to unstable power supply.
– Built-in alarm system to identify user when the power supply demonstrates abnormal characteristic.

Voltage Intel Standard Measure Range
Min. Max. Min. Max.
+5V 4.75V 5.25V 4.6V 5.5V
+3.3V 3.1V 3.5V 3V 3.6V
+12V 11.4V 12.6V 11V 13V
-12V -10.8V -13.2V -10.5V -13.4V
+5Vsb 4.75V 5.25V 4.6V 5.5V
P.G. 100ms≦T≦500ms

Automoated Mode: The automated testing mode allows power users and system builders to quickly and effortlessly test the power supplies without ahving to manually operate the tester, greatly increasing the testing efficiency. Should the tester locate an abnormal specification, the alarm would sound to automatically notify the testing personnel.

Model B
Connect all required connectors and turn on the PSU.
Press and hold the “CHECK” button for more than 5 seconds to initiate automated testing.
AUTORUN
AUTORUN
AUTORUN
Testing Complete.

Manual Mode: The manual mode enables user to manually check each rail individually and allows the test result screen be displayed longer before user manually move on to next esting point.

Model A
Connect all required connectors and turn on the PSU.
Press “CHECK” button to start testing sequence.
Press “CHECK” button to continue on to each testing steps.
Press “Check” button to continue on to each testing steps.
Press “Check” button to continue on to each testing steps.
Testing complete.


Specification:

P/N AC0015
Type 24pin, PCI-E, CPU, Molex, SATA
Color Black
Dimension of main body(H x W x D) 130mm x 75mm x 24.7mm
Weight 0.14kg

* Specifications are subject to change without notice.
* The product picture(s) is only for your reference, it may differ from the actual product.

 

Additional Information

Weight 2 lbs
Dimensions 3 x 4 x 6 in

Reviews

There are no reviews yet.

Be the first to review “Dr.Power II”